top of page

luvibee Group

Public·94 members

Firmwarenokiaasha501rm902


DOWNLOAD > https://urlin.us/2tzuQM



Firmwarenokiaasha501rm902


How to Flash Nokia Asha 501 RM-902 Firmware


If you have a Nokia Asha 501 RM-902 phone that is stuck on the logo, locked by a password, or bricked by a software issue, you can flash it with the official stock firmware to restore it to its original state. Flashing is the process of installing a new operating system on your phone using a computer and a flash tool. In this article, we will show you how to flash Nokia Asha 501 RM-902 firmware using Miracle Box, a popular flash tool for Nokia phones.


What You Need


Before you start flashing your phone, you need to have the following items ready:


A Nokia Asha 501 RM-902 phone with a charged battery.


A USB cable compatible with your phone.


A computer with Windows OS and Miracle Box software installed.


The Nokia Asha 501 RM-902 stock firmware file. You can download it from here [^1^]. The file name is Nokia_Asha_501_RM-902_10122014_MIRA.zip and the file size is 56 MB.


A backup of your phone data. Flashing will erase all your data on your phone, so make sure you have a copy of your contacts, messages, photos, and other important files before proceeding.


How to Flash


Once you have everything ready, follow these steps to flash your phone:


Extract the firmware file on your computer using WinRAR or any other unzip software. You will get a folder named Nokia_Asha_501_RM-902_10122014_MIRA containing the flash file and other files.


Run Miracle Box software on your computer. If you don't have it, you can download it from here.


Click on the MTK tab and then click on Write.


Select the scatter file from the firmware folder. The scatter file is named MT6572_Android_scatter.txt.


Click on Start Button and wait for Miracle Box to load the firmware.


Turn off your phone and remove the battery. Then insert the battery again but don't turn on the phone.


Connect your phone to your computer using the USB cable. Miracle Box will detect your phone and start flashing it.


Wait for the flashing process to complete. It may take several minutes depending on your computer speed and firmware size.


When the flashing is done, you will see a green circle with OK on Miracle Box. Disconnect your phone from your computer and turn it on.


Congratulations! You have successfully flashed your Nokia Asha 501 RM-902 phone with the stock firmware.


Troubleshooting


If you encounter any problems while flashing your phone, here are some tips to help you:


If Miracle Box does not detect your phone, try changing the USB port or cable. Make sure you have installed the correct USB driver for your phone on your computer.


If Miracle Box shows an error message or stops responding during flashing, try restarting the software or your computer. Make sure you have enough free space on your computer and close any other programs that may interfere with Miracle Box.


If your phone does not boot up after flashing, try doing a factory reset by pressing and holding the power button and volume down button together until you see a recovery menu. Then select wipe data/factory reset and confirm. This will erase all your data but may fix some software issues. 061ffe29dd






About

Welcome to the group! You can connect with other members, ge...

Members

  • 錢書耀
  • smride company
    smride company
  • NYC SEO
    NYC SEO
  • Table Tennis
    Table Tennis
  • acutrack website
    acutrack website
bottom of page