top of page

luvibee Group

Public·80 members

Igo Primo Dem Files 19


Igo Primo Dem Files 19 ->>> https://urlin.us/2toYUM





AVICnet is originaly a Russian mod which vastly increases the functionality of our AVICs, mainly by allowing us to easily use winCE programs such as iGo Primo and HobDrive. Below is an English variation. Enjoy!A Few Notes- There are no maps included in the download below, you must copy the maps you want onto your unit.- The stock iGo TTS files have been removed to save space. You can put them back in if you prefer, simply copy the My Flash Disk\APL2\iGo\ScanSoft onto your unit. You should have these files from when you initially backed up your unit.WarningsBefore attempting install AVICnet make a complete backup of your current AVIC My Flash Disk just in case something goes wrong. You are and only you are responsible for your AVIC! Note I have tested it on a North American F500BT, F700BT, F900BT and X910BT but am not sure how it will behave on other units. It will also work on F90BT and X710BT.Installation Instructions1) Back up your unit! Copy the entire "My Flash Disk" onto a SD card and keep it in a safe place.2) Ensure you are running Windows CE version 5.0 or above. You can check this by booting into testmde, going to the control panel and tapping on system. It will tell you your CE version there. If you need to upgrade, the f500bt is here or f900bt here. Note this is for a NA AVIC, not Euro!3) Download the file in post #2. Extract, copy to a SD card.4) Delete "My Flash Disk" on your unit from testmode.5) Copy "My Flash Disk" from your SD card to your unit.6a) Copy maps,pois, dem files, ect from your backup of "My Flash Disk" to your unit. They are located in my flash disk/apl2/igo/content. Primo will share the stock iGo's maps.6b) Copy Primo 2.0 voices to the \my flash disk\apl2\primo3 folder. Note Primo 1.0 has Samantha included.7) Reboot. Your unit will auto reboot once more to initiallize AVICnet. F900bt and X910bt may have an issue with Primo not getting a proper fix. This is due to issues with the VSS/gyro sensor. A solution is on post #3 of this thread.PrimoYou will notice in the Navigation Menu there are 2 options to launch Primo, Primo and Primo 2.0.iGo Primo (Primo 1.0) uses a lower memory requirement to keep it from crashing with the stock iGo running and accessible in the background. It is a little more sluggish with slightly lower FPS then iGo Primo 2.0. Hard buttons and sound regardless of source both work in Primo 1.0. Samantha TTS is included.iGo Primo 2.0 does not have the lower memory requirement settings which means it is snappier the has higher FPS. The stock iGo process is killed to free up memory, which means AVICnet functions are not available. In place of the AVICnet icon on the Top Menu there is a message stating "Avic Net disabled, press to restart". If you tap this icon your unit will run the ezrider.exe file and allow you access to AVIC net's menus. Upon touching the icon on the top of the Top Menu screen the ezriider proces is once again killed to free memory. Press and hold down the "AVIC Net is disabled" icon to do a soft reset. AVICnet and all other functions will be available after the reset.Note that Primo 1.0 and Primo 2.0 have their own save folders in each's respective folders (Primo and Primo3) therefore changes made to one will not be made in the other. This includes favorites, ect.InternetI do not have a 3g usb key to test internet with AVICnet, however here are Bagua's instructions as per the Italian thread:For internet I used a USB modem Huawei E1550 model, but should be also supported the following modems: - Globalsat BU-353 - LG KP500 - Nokia 5300 - AnyDATA ADU310A - Huawei E160G - Huawei E220 - Huawei E1550 - E1820 Huawei - ZTE MF100 - ZTE MF626 - ZTE MF627First, if you have a compatible modem Huawei you have to download this program: PortSwitchTool Insert the USB modem into your PC and start PortSwitchTool, selesionate "CD-ROM to Diag" press on "Next" and then "Finish".MODEM INSTALLATION - Reach the utilities menu and click on "Modem" select the modem you want, and click




About

Welcome to the group! You can connect with other members, ge...

Members

bottom of page