Windows 95 Boot Disk Img Download BEST
These disks are original boot floppy disk media for use with Microsoft Windows CD-ROMs. Not all Windows 9x/ME CDs are bootable, not all CDs included boot disks, and DOS will not see a CD-ROM drive unless a driver is loaded. OEMs were expected to provide compatible CD-ROM with the boot media provided with their systems. However towards the very late 90s, most vendors standardized on IDE/ATAPI CD-ROM hardware and the use of the OEM Adaption Kit (OAK) driver. If your CD drive is not IDE compatible (such as an MKE or Panasonic interface) you must manually add your own driver. Note: you can use the Windows 98 boot disk with Windows 95 to make things easier. If you have any UNTOUCHED OEM boot disks with different drivers, please submit them.
Windows 95 Boot Disk Img Download
These are the only files needed to make a floppy disk boot-able. This image is for those of you that wish to make a customized bootdisk, orhave need for a plain boot-able WinME floppy to run programs with...like a BIOS update and so on.
The boot disk you use needs to have CD-ROM support and you would run setup from the CD e.g D:\setup Also you will need to partition and format the virtual hard drive before you run setup. Also if the boot disk has Smart Drive you should run that before setup so it copies the files faster.
The program has many utilitarian uses at home and in the office. As a serious PC user, you probably have tons of old but still useful floppy disks. With WinImage in place, you can turn them into disk images, which can be stored on the hard drive and recreated, when a need arises. In combination with a CD creating tool, WinImage can help you create your own custom boot disk with hardware diagnostic or virus cleaning software to bring a problem PC back up and running without being in Windows. As a hard-disk backup solution, WinImage allows you to save hours and even days restoring a system and configurations on a machine that has experienced a hard-disk crash or software corruption. Along with homes and offices, this ability is a must for training classes, where restoring torn down PC configurations quickly is critical. WinImage is an ASP shareware program. WinImage has many cool features!
This page provides details about creating a boot diskette, or floppy disk, for Windows and not how to create a bootable CD. If you're looking for steps for newer versions of Windows (e.g., Windows 7, 8, or 10), see: How to create a recovery disk in Windows.
First, the last boot disk was applied to Windows XP. After that M$ assumed your system supported bootable optical disks. The subsequent OSes (Vista and 7) came on Bootable disks, but did not have Boot disks.
Third, while it's the win95 boot disk, fdisk /mbr has worked for me with FAT and NTFS disks and all Windows OSes so far. The only issue I've found is that when the MBR is used to hide recovery partitions (IBM ThinkCentre desktops are the ones I've seen this in primarily), running fdisk /mbr will "reveal" those partitions. This does not affect the ability of the recovery partitions, you just see them in Windows now as extra drives.
I'm surprised that you can boot with your manufacturer provided disks. Have you check the BIOS settings to make sure your computer boots from the CD before the HD? A lot of work machines are setup this way, to keep people from messing around.
Note If rebuilding the BCD does not resolve the startup issue, you can export and delete the BCD, and then run this option again. By doing this, you make sure that the BCD is completely rebuilt. To do this, type the following commands at the Windows RE command prompt: bcdedit /export C:\BCD_Backup c: cd boot attrib bcd -s -h -r ren c:\boot\bcd bcd.old bootrec /RebuildBcd /FixMbr The /FixMbr option writes a Windows 7 or Windows Vista-compatible MBR to the system partition. This option does not overwrite the existing partition table. Use this option when you must resolve MBR corruption issues, or when you have to remove non-standard code from the MBR. /FixBoot The /FixBoot option writes a new boot sector to the system partition by using a boot sector that is compatible with Windows Vista or Windows 7. Use this option if one of the following conditions is true: The boot sector has been replaced with a non-standard Windows Vista or Windows 7 boot sector. The boot sector is damaged. An earlier Windows operating system has been installed after Windows Vista or Windows 7 was installed. In this scenario, the computer starts by using Windows NT Loader (NTLDR) instead of Windows Boot Manager (Bootmgr.exe). /ScanOs The /ScanOs option scans all disks for installations that are compatible with Windows Vista or Windows 7. Additionally, this option displays the entries that are currently not in the BCD store. Use this option when there are Windows Vista or Windows 7 installations that the Boot Manager menu does not list. /RebuildBcd The /RebuildBcd option scans all disks for installations that are compatible with Windows Vista or Windows 7. Additionally, this option lets you select the installations that you want to add to the BCD store. Use this option when you must completely rebuild the BCD.
Microsoft Windows 3.1/3.11 & Windows for Workgroups3.1/3.11 have no Bootdisks as MS-DOS needs to be installed first.Download MS-DOS version used or if not known try the MS-DOS6.22 bootdisk first.
Consolidate as many diagnostic tools as possible into one bootable CD. Wouldn't you like to avoid digging into the dusty box to look for the right floppy disk, but simply run them all from a single CD? Then the Ultimate Boot CD is for you!
Name of ToolVersionNotesCPU TestsCPU Burn-in1.00 The Linux version which is included in UBCD is at V1.00. V1.01 applies to Windows only. Mersenne Prime Test23.5.2 Need to update Mersenne Prime Test boot disk to allow user to manually override the decision (based on automatic CPU detection) to run V23/V24. The original maintainer does not have time to do this, so if you are interested to help, please contact me directly. StressCPU24-Oct-05 V2.0 is out, but I need someone to either update Adrian's combo Linux loader (/boot/cpustres*) or send me a new one. Please email me directly if you can help. Memory TestsMemtest863.3 Memtest86+1.70 Windows Memory Diagnosticn/a DocMem RAM Diagnostic3.1beta TestMem44 Peripherals ToolsParallel port detection and test utilities1.45 ATAPI CDROM Identification2.22 CHZ Monitor-Test1.01 CPU InformationIntel Processor Frequency ID7.2.20041115 Intel Processor Identification Utility3.3.20061218 x86test0.10a System InformationAIDA162.14 Discontinued NSSI0.59.14 PC-Config9.33 ASTRA5.31 Demo version PCISniffer1.5 PCI1.1 pcidevs.txt: 13 Feb 2006 CTIA2.7 DIMM_ID3.01 Benchmark ToolsSystem Speed Test 324.78 3D Benchmark VGA1.0 CPU Benchmarkn/a CD Index1.1 QwikTestn/a BIOS ToolsBIOS1.35.0 WipeCMOS1.2 CMOSPWD4.8 !BIOS3.20 Hard Disk Installation ToolsMaxBlast 5 (Maxtor)5.0 DiscWizard 2003 (Seagate)10.45.06 Disk Manager (Seagate)9.56a Disk Manager (Samsung)10 Hard Disk Diagnostic ToolsDrive Fitness Test (IBM/Hitachi)4.09 Diagnostic Tool (Fujitsu)6.90 SeaTools for DOS (Seagate/Maxtor)1.09 SHDIAG (Samsung)1.25 HUTIL (Samsung)1.21/2.03 From soeren: "HUTIL 2.00 lacks the possibility to view the SMART values and it appears to be a lot slower than 1.21. It's only needed for the newest Samsung drives, the "older" ones still work with 1.21." DLG Diagnostic (Western Digital)4.15/5.04c V5.x has been reported not to work on some older machines, so V4.15 has been included as a backup. Data Lifeguard (Western Digital)11.2 SCSIMax (Maxtor/Quantum)1.21 GWSCAN (Gateway)3.15/5.09 V5.x is for IDE hard drives larger than 10GB. For IDE hard drives 10GB or smaller, V3.15 is recommended. ESTest (ExcelStor)4.20 Salvation HDD Scan and Repair3.0 Demo version MHDD324.6 ViVARD0.4 HDAT24.52 For personal use only Hard Disk Device Management ToolsFeature Tool (IBM/Hitachi)2.05 AMSET (Maxtor)4.00 MAXLLF (Maxtor)1.1 UATA100 (Seagate)3.06 Ultra ATA Manager (Western Digital)June, 2003 SUTIL1.01 ESFeat (ExcelStor)2.10 ATA Password Tool1.1 SMARTUDM2.00 ATAINF1.3m Hard Disk Wiping ToolsDarik's Boot and Nuke1.0.7 CopyWipe1.14 Active@ KillDisk Free Edition4.1 Free Edition. Supports "One Pass Zeros" method only. PC INSPECTOR e-maxx0.95 Actual version is 0.95 Build 775, but is referred to as 1.0 on product website. HDDErase3.1 Hard Disk Cloning ToolsHDClone (Free Edition)3.2.6 g4u1.17 Unable to integrate latest version of g4u (does not like mkisofs -N flag, which is required for integrating Windows CD). If anyone knows of a workaround, please email me. UDPcastn/a PC INSPECTOR clone maxx0.95 Build 769 Actual version is 0.95 Build 769, but is referred to as 1.0 on produce website. XXCOPY2.93.1 Latest version on website says 2.95.3, but XXCOPY16.EXE still shows 2.93.1. EaseUs Disk Copy1.0 COPYR.DMABuild 013 CopyWipe1.14 Hard Disk Low-Level Editing ToolsDisk Editor3.0 DISKMAN44.01 PTS DiskEditor1.04 Partition ToolsRanish Partition Manager2.40 Using stable version because V2.44 is beta and reported to be buggy. Free FDISK1.3.0 SPFDISK (Special FDISK)2000-03t XFDISK (Extended FDISK)0.9.3 beta Cute Partition Manager0.9.5 Although website says 0.9.6, program version and history log both says 0.9.5. PTDD Super Fdisk1.0 Partition Resizer1.3.4 FIPS2.0 Active@ Partition Recovery2.1.1 Demo version TestDisk6.5 Partition Saving3.40 MBRtool2.3.100 MBRWork1.07b Boot ManagersSmart BootManager3.7.1 Gujin1.9 GAG4.8 XOSL1.1.5 Super Grub Disk0.9590 File ToolsDOS Navigator6.4.0 File Maven3.5a Necromancer's DOS Navigator2.15 Build 4000 D-Browse1.24 Must enable long filename support for it to work. Volkov Commander4.99.08 alpha Or you can just type "vc" at the DOS prompt to launch this file manager. Eraser for DOS5.82 NTFS ToolsOffline NT Password & Registry Editor070409 Active NTFS Reader for DOS1.0.1 EditBINI1.01.1 Boot Partition2.60 Avira NTFS4DOS Personal1.9 For personal use only Anti-Virus/Malware ToolsF-Prot Antivirus for DOS3.16f For personal use only. Virus definition: 4 May 2007. McAfee Antivirus Scanner4.40.0 For personal use only. Virus definition: 3 May 2007. BugHunter2.1 Note that C:\ has to be accessible and writable, otherwise BUGHUNT.INI must be edited and the line C:\BUGHUNT.DAT changed to X:\BUGHUNT.DAT, where X is the drive letter of the RAM disk. Network ToolsArachne WWW Browser1.90 NetCopy0.2 FileLink3.01 This program is part of Caldera OpenDOS V7.03 QNX Demo Browser (network + modem version)4.00 DOSRDP2.0/XP DOS Boot DisksFreeDOS Boot Disk3.40 This is named dosubcd.igz under the images subdirectory, and is the default boot disk for most DOS programs under dosapps. You can easily make other DOS disk images your default by renaming the appropriate image file (eg. lzubcd.igz) to dosubcd.igz. LZ-DOS Boot Disk3.40 OpenDOS Boot Disk3.40 Won't work in a virtual machine, but will work on a physical machine. MS-DOS Boot Disk3.40 By default, this is not included in UBCD due to its commercial nature. But you can easily download and place it under the images subdirectory in order to use it. NwDsk: NetWare Boot Disk3.40 You can run TinyHost by choosing the "tinyhost" profile after booting. Then you will be able to connect remotely from any Java-capable machine with the command java -jar tinyclient.jar x.x.x.x password (password defaults to 'nwdsk'). MSRRC: Bart's Network Disk Clone3.35 Linux Boot DisksTom's Boot Disk2.0.103 BasicLinux3.40 Trinux0.89 The latest incarnation of the Trinux project is ubuntutrinux, but a stable release does not exist yet.