Bravis Ms-195 Driver
Click Here >>> https://urlin.us/2tuzOx
Bravis Ms-195 Driver
How to Install Bravis MS-195 Driver on Your PC
Bravis MS-195 is a USB device that allows you to connect your Bravis smartphone to your PC and perform various tasks such as file transfer, USB tethering, flashing, rooting, etc. However, to make your PC recognize your Bravis device, you need to install the Bravis MS-195 driver on your PC first. In this article, we will show you how to download and install the Bravis MS-195 driver on your Windows PC.
Download Bravis MS-195 Driver
The first step is to download the Bravis MS-195 driver from a reliable source. You can use the link below to download the latest version of the driver from the official website of Bravis:
Download Bravis MS-195 Driver
The file size is about 10 MB and it contains the driver files for both 32-bit and 64-bit versions of Windows. After downloading the file, you need to extract it to a folder on your PC using a tool like WinRAR or 7-Zip.
Install Bravis MS-195 Driver
The next step is to install the Bravis MS-195 driver on your PC. To do that, follow these steps:
Connect your Bravis device to your PC using a USB cable.
Open Device Manager on your PC by pressing Windows + X keys and selecting Device Manager from the menu.
Look for a device with a yellow exclamation mark or an unknown device under Other devices or Portable devices category. This is your Bravis device that needs the driver.
Right-click on the device and select Update driver software from the context menu.
Select Browse my computer for driver software option and click Next.
Click Browse and navigate to the folder where you have extracted the Bravis MS-195 driver and click OK.
Select the android_winusb file within that folder and click Open.
Select Android Bootloader Interface option and click Next.
Click Install this driver software anyway if you see a warning message.
Wait for the installation to complete and click Finish.
Congratulations! You have successfully installed the Bravis MS-195 driver on your PC. You can now use your Bravis device with your PC without any issues.
Troubleshooting Bravis MS-195 Driver
If you encounter any problems with the Bravis MS-195 driver, you can try the following solutions:
Make sure you have enabled USB debugging mode on your Bravis device. To do that, go to Settings > About phone and tap on Build number seven times to enable Developer options. Then go back to Settings > Developer options and enable USB debugging.
Make sure you have selected the correct USB connection mode on your Bravis device. To do that, swipe down from the top of the screen and tap on the USB icon. Then select MTP (Media Transfer Protocol) or PTP (Picture Transfer Protocol) mode depending on your need.
Make sure you have used a compatible USB cable and a working USB port on your PC. Try using a different cable or port if possible.
Make sure you have disabled any antivirus or firewall software on your PC that may interfere with the driver installation. You can enable them again after the installation is done.
Make sure you have restarted your PC and your Bravis device after the driver installation. This will refresh the system and ensure the driver is working properly.
If none of these solutions work, you can contact Bravis customer support for further assistance. ec8f644aee